...

BPC-157 Dosage Calculator

BPC-157 is a synthetic pentadecapeptide (15 amino acids) studied in preclinical research. This page gives the reference math for reconstituting a BPC-157 vial and converting a dose in micrograms (mcg) into a syringe draw in millilitres (mL) and insulin-syringe units. All figures on this page are reference information only – they are not a recommendation to use, buy, or administer BPC-157, and BPC-157 has no FDA-approved human dose. Use the free peptide calculator below, then check the worked tables.

BPC-157 Reconstitution Calculator

Enter your vial size, bacteriostatic water, and target dose to get an exact syringe draw – with a live visual and a round-unit optimizer so you never eyeball an odd tick mark again.

Your inputs

Presets set a typical packaged vial size only. Always use your own prescribed or intended dose below.
Typically 1-5 mL. More water = lower concentration, larger draw volume.

Your result

Draw 10 units
0.10 mL on a U-100 insulin syringe
10% of a 1 mL syringe
Concentration
2,500 mcg/mL
mcg per unit (U-100)
25 mcg / unit
Draw volume
0.10 mL
Doses per vial
20 doses
 
 

Same three formulas as the homepage calculator: concentration = vial strength divided by BAC water; draw volume = dose divided by concentration; syringe units = draw volume times 100 (U-100) or times 40 (U-40). Reference information only – not medical advice.

Quick answer: 5 mg vial + 2 mL BAC water

A 5 mg BPC-157 vial mixed with 2 mL of bacteriostatic (BAC) water gives a concentration of 2,500 mcg per mL. At that concentration, 250 mcg = 0.10 mL = 10 units on a U-100 syringe.

The 3-step math:

  1. Concentration: 5 mg = 5,000 mcg, divided by 2 mL = 2,500 mcg/mL.
  2. Draw volume: 250 mcg divided by 2,500 mcg/mL = 0.10 mL.
  3. Syringe units (U-100): 0.10 mL x 100 = 10 units. Each unit is 25 mcg at this concentration.

Use the calculator above to check any other vial size, water volume, or dose before drawing.

BPC-157 reconstitution quick-reference table

All rows use a U-100 insulin syringe (100 units per mL). Doses per vial are counted at 250 mcg per dose. Half-unit draws (2.5 and 7.5 units) are hard to measure accurately on a standard syringe – prefer a water volume that gives a whole-unit draw; the calculator’s round-unit optimizer finds one.

Vial size BAC water Concentration mcg per unit (U-100) Units for 250 mcg Units for 500 mcg Doses per vial at 250 mcg
5 mg 1 mL 5,000 mcg/mL 50 mcg 5 units 10 units 20
5 mg 2 mL 2,500 mcg/mL 25 mcg 10 units 20 units 20
5 mg 3 mL 1,667 mcg/mL 16.7 mcg 15 units 30 units 20
10 mg 1 mL 10,000 mcg/mL 100 mcg 2.5 units 5 units 40
10 mg 2 mL 5,000 mcg/mL 50 mcg 5 units 10 units 40
10 mg 3 mL 3,333 mcg/mL 33.3 mcg 7.5 units 15 units 40

Worked check, 5 mg + 2 mL: 5,000 mcg / 2 mL = 2,500 mcg/mL; 2,500 / 100 = 25 mcg per unit; 250 / 25 = 10 units; 500 / 25 = 20 units; 5,000 / 250 = 20 doses per vial. For the step-by-step method, see our guide to peptide reconstitution.

Commonly cited reference ranges

These are commonly cited research figures extrapolated from animal and preclinical literature. They are NOT a recommendation, and they are NOT a dose for any person. BPC-157 has no FDA-approved human dose, no established human safety profile, and no approved human indication. Any human use is unapproved and experimental. The figures below are given only so readers can recognise the numbers they will meet in research summaries – and check them against the calculator instead of guessing.

Figure Commonly cited range Notes
Dose per administration 250-500 mcg Most often cited per-administration range in research summaries.
Frequency 1-2 times daily Frequency cited alongside the per-administration range.
Typical block length 4-8 weeks Length of the blocks most often described in research summaries.
FDA-approved human dose None BPC-157 is not approved for human use by the FDA.

At 2,500 mcg/mL (5 mg vial + 2 mL BAC water), the ends of that cited range are 10 units (250 mcg) and 20 units (500 mcg) on a U-100 syringe. Do not scale these figures to body weight or to other peptides – BPC-157 is measured in mcg, not IU, and its figures do not transfer.

How the math works

The same three formulas run every peptide reconstitution. Only the numbers change.

Step Formula BPC-157 worked example (5 mg + 2 mL, 250 mcg)
1. Concentration Vial strength (mcg) divided by BAC water (mL) = mcg/mL 5,000 mcg / 2 mL = 2,500 mcg/mL
2. Draw volume Target dose (mcg) divided by concentration (mcg/mL) = mL to draw 250 mcg / 2,500 mcg/mL = 0.10 mL
3. Syringe units mL to draw x 100 = units on a U-100 syringe (x 40 on a U-40 syringe) 0.10 mL x 100 = 10 units (U-100); 0.10 mL x 40 = 4 units (U-40)

Key conversions: 1 mg = 1,000 mcg, so 5 mg = 5,000 mcg. On a U-100 syringe, 100 units = 1 mL, so 1 unit = 0.01 mL. For the difference between IU, mg and mcg in general, see IU vs mg vs mcg: the difference.

Errors and safety: check before you draw

  • The mg vs mcg 1,000x error: 1 mg = 1,000 mcg. Entering 5 mcg instead of 5 mg (or a 250 mg dose instead of 250 mcg) is a thousand-fold mistake. Always check the unit on every field – vial, dose, and result – before drawing.
  • Syringe dead space: the liquid left in the needle hub and tip after a draw is not delivered. Use low dead-space syringes where available, do not try to “make up” dead space by overdrawing, and keep the same syringe type for the whole vial so your numbers stay consistent.
  • Storage: store reconstituted BPC-157 refrigerated at 2-8 C (36-46 F), upright, away from light. Keep the unreconstituted (lyophilised) vial per its label, in a cool, dry place.
  • Use within 28 days of reconstitution: under USP multi-dose vial guidance, a reconstituted multi-dose vial should be discarded 28 days after first use unless the manufacturer states a shorter period. Note the reconstitution date on the vial and discard at 28 days even if liquid remains.
  • Never freeze reconstituted solution: freezing can damage the peptide and the vial. Discard any vial that has been frozen, or any solution that is cloudy, discoloured, or contains particles.
  • Check before every draw: confirm the vial strength, the water volume you added, the concentration on the label you wrote, and the syringe scale (U-100 vs U-40) – then re-check the calculator result.

Frequently asked questions

How many units is 250 mcg of BPC-157?

It depends on the concentration. With the common 5 mg vial + 2 mL BAC water (2,500 mcg/mL), 250 mcg is 0.10 mL, which is 10 units on a U-100 syringe. With 1 mL of water (5,000 mcg/mL) the same 250 mcg is only 5 units, and with 3 mL (1,667 mcg/mL) it is 15 units. Always calculate from your own vial and water volume – never assume 250 mcg is always 10 units.

How much BAC water for a 5 mg BPC-157 vial?

2 mL is the most commonly used volume for a 5 mg vial: it gives 2,500 mcg/mL, so 250 mcg is a measurable 10 units on a U-100 syringe. 1 mL gives 5,000 mcg/mL (250 mcg = 5 units) and 3 mL gives 1,667 mcg/mL (250 mcg = 15 units). More water makes each dose a larger, easier-to-measure draw, but does not change the total amount of peptide in the vial.

How many doses are in a 5 mg vial?

A 5 mg vial contains 5,000 mcg. At 250 mcg per dose that is 20 doses (5,000 / 250 = 20); at 500 mcg per dose it is 10 doses. A 10 mg vial holds twice as many: 40 doses at 250 mcg. In practice, expect slightly fewer usable doses because of dead space and small losses with each draw.

How long does reconstituted BPC-157 last?

Store it refrigerated at 2-8 C and use it within 28 days of reconstitution, following USP multi-dose vial guidance. Write the reconstitution date on the vial, discard it after 28 days even if solution remains, and never freeze reconstituted solution. Discard it sooner if it turns cloudy, changes colour, or contains particles.

Is BPC-157 dosing the same on a U-40 syringe?

No – units differ between syringe scales, even though the volume and the mcg dose are the same. The same 0.10 mL (250 mcg at 2,500 mcg/mL) is 10 units on a U-100 syringe but only 4 units on a U-40 syringe (0.10 x 40 = 4). Always check which scale your syringe uses, and use a calculator that supports it – the calculator on this page supports U-100, U-40, and plain mL syringes.

References and sources

  • USP multi-dose vial guidance – 28-day beyond-use limit for multi-dose vials after first use, and refrigerated storage at 2-8 degrees C for reconstituted solutions, unless the manufacturer states otherwise.
  • Standard bacteriostatic water composition (0.9% benzyl alcohol in sterile water for injection) – the diluent used for the reconstitution figures on this page.
  • Peptide reconstitution method and unit conversions – see our guide to peptide reconstitution and IU vs mg vs mcg: the difference.

Last updated: November 2026

This content is for educational and research purposes only. It is not medical advice. Always confirm doses with a clinician.

Related peptide calculators

    Scroll to Top