...

TB-500 Dosage Calculator

TB-500 is a synthetic fragment of thymosin beta-4 (TB4) studied in preclinical research. This page gives the reference math for reconstituting a TB-500 vial and converting a dose in milligrams (mg) into a syringe draw in millilitres (mL) and insulin-syringe units. All figures on this page are reference information only — they are not a recommendation to use, buy, or administer TB-500, and TB-500 has no FDA-approved human dose. Use the free peptide calculator below, then check the worked tables.

TB-500 Reconstitution Calculator

Enter your vial size, bacteriostatic water, and target dose to get an exact syringe draw – with a live visual and a round-unit optimizer so you never eyeball an odd tick mark again.

Your inputs

Presets set a typical packaged vial size only. Always use your own prescribed or intended dose below.

Typically 1-5 mL. More water = lower concentration, larger draw volume.

Your result

Draw 10 units
0.10 mL on a U-100 insulin syringe
10% of a 1 mL syringe
Concentration
2,500 mcg/mL
mcg per unit (U-100)
25 mcg / unit
Draw volume
0.10 mL
Doses per vial
20 doses

Same three formulas as the homepage calculator: concentration = vial strength divided by BAC water; draw volume = dose divided by concentration; syringe units = draw volume times 100 (U-100) or times 40 (U-40). Reference information only – not medical advice.


Quick answer: 5 mg vial + 2 mL BAC water

A 5 mg TB-500 vial mixed with 2 mL of bacteriostatic (BAC) water gives a concentration of 2,500 mcg per mL (2.5 mg/mL). At that concentration, a 2 mg dose = 0.80 mL = 80 units on a U-100 syringe.

The 3-step math:

  • Concentration: 5 mg = 5,000 mcg, divided by 2 mL = 2,500 mcg/mL.
  • Draw volume: 2,000 mcg divided by 2,500 mcg/mL = 0.80 mL.
  • Syringe units (U-100): 0.80 mL x 100 = 80 units. Each unit is 25 mcg at this concentration.

Use the calculator above to check any other vial size, water volume, or dose before drawing.

TB-500 reconstitution quick-reference table

All rows use a U-100 insulin syringe (100 units per mL). Doses per vial are counted at 2 mg per dose. Half-unit draws are hard to measure accurately on a standard syringe – prefer a water volume that gives a whole-unit draw; the calculator’s round-unit optimizer finds one.

Vial size BAC water Concentration mcg per unit (U-100) Units for 2 mg Units for 2.5 mg Doses per vial at 2 mg
5 mg 1 mL 5,000 mcg/mL 50 mcg 40 units 50 units 2.5
5 mg 2 mL 2,500 mcg/mL 25 mcg 80 units 100 units 2.5
5 mg 3 mL 1,667 mcg/mL 16.7 mcg 120 units 150 units 2.5
10 mg 1 mL 10,000 mcg/mL 100 mcg 20 units 25 units 5
10 mg 2 mL 5,000 mcg/mL 50 mcg 40 units 50 units 5
10 mg 3 mL 3,333 mcg/mL 33.3 mcg 60 units 75 units 5

Worked check, 5 mg + 2 mL: 5,000 mcg / 2 mL = 2,500 mcg/mL; 2,500 / 100 = 25 mcg per unit; 2,000 / 25 = 80 units; 2,500 / 25 = 100 units; 5,000 / 2,000 = 2.5 doses per vial. For the step-by-step method, see our guide to peptide reconstitution.

Commonly cited reference ranges

These are commonly cited research figures extrapolated from animal and preclinical literature. They are NOT a recommendation, and they are NOT a dose for any person. TB-500 has no FDA-approved human dose, no established human safety profile, and no approved human indication. Any human use is unapproved and experimental. The figures below are given only so readers can recognise the numbers they will meet in research summaries — and check them against the calculator instead of guessing.

Figure Commonly cited range Notes
Dose per administration 2–2.5 mg Most often cited per-administration range in research summaries.
Frequency Twice weekly for 4–6 weeks, then weekly Frequency cited alongside the per-administration range.
Typical block length 4–6 weeks, then 2 mg weekly Length of the blocks most often described in research summaries.
FDA-approved human dose None TB-500 is not approved for human use by the FDA.

At 2,500 mcg/mL (5 mg vial + 2 mL BAC water), the ends of that cited range are 80 units (2 mg) and 100 units (2.5 mg) on a U-100 syringe. Do not scale these figures to body weight or to other peptides — TB-500 is measured in mcg, not IU, and its figures do not transfer.

How the math works

The same three formulas run every peptide reconstitution. Only the numbers change.

Step Formula TB-500 worked example (5 mg + 2 mL, 2 mg)
1. Concentration Vial strength (mcg) divided by BAC water (mL) = mcg/mL 5,000 mcg / 2 mL = 2,500 mcg/mL
2. Draw volume Target dose (mcg) divided by concentration (mcg/mL) = mL to draw 2,000 mcg / 2,500 mcg/mL = 0.80 mL
3. Syringe units mL to draw x 100 = units on a U-100 syringe (x 40 on a U-40 syringe) 0.80 mL x 100 = 80 units (U-100); 0.80 mL x 40 = 32 units (U-40)

Key conversions: 1 mg = 1,000 mcg, so 5 mg = 5,000 mcg. On a U-100 syringe, 100 units = 1 mL, so 1 unit = 0.01 mL. For the difference between IU, mg and mcg in general, see IU vs mg vs mcg: the difference.

Errors and safety: check before you draw

  • The mg vs mcg 1,000x error: 1 mg = 1,000 mcg. Entering 2 mcg instead of 2 mg (or a 2,000 mg dose instead of 2,000 mcg) is a thousand-fold mistake. Always check the unit on every field – vial, dose, and result – before drawing.
  • Syringe dead space: the liquid left in the needle hub and tip after a draw is not delivered. Use low dead-space syringes where available, do not try to “make up” dead space by overdrawing, and keep the same syringe type for the whole vial so your numbers stay consistent.
  • Storage: store reconstituted TB-500 refrigerated at 2-8 C (36-46 F), upright, away from light. Keep the unreconstituted (lyophilised) vial per its label, in a cool, dry place.
  • Use within 28 days of reconstitution: under USP multi-dose vial guidance, a reconstituted multi-dose vial should be discarded 28 days after first use unless the manufacturer states a shorter period. Note the reconstitution date on the vial and discard at 28 days even if liquid remains.
  • Never freeze reconstituted solution: freezing can damage the peptide and the vial. Discard any vial that has been frozen, or any solution that is cloudy, discoloured, or contains particles.
  • Check before every draw: confirm the vial strength, the water volume you added, the concentration on the label you wrote, and the syringe scale (U-100 vs U-40) – then re-check the calculator result.

Frequently asked questions

How many units is 2 mg of TB-500?

It depends on the concentration. With the common 5 mg vial + 2 mL BAC water (2,500 mcg/mL), 2 mg = 0.80 mL = 80 units on a U-100 syringe. At the same concentration, 2.5 mg = 1.00 mL = 100 units. See the table above for other vial and water combinations.

How much BAC water for a 5 mg TB-500 vial?

2 mL is the most commonly used volume for a 5 mg vial: it gives 2,500 mcg/mL, so 2 mg is a measurable 0.80 mL draw (80 units). More water gives a lower concentration and a larger draw; less water gives a higher concentration and a smaller draw. Use the calculator to re-check if you change the volume.

How many doses are in a 5 mg vial?

A 5 mg vial contains 5,000 mcg. At 2 mg per dose that is 2.5 doses (5,000 / 2,000 = 2.5); at 2.5 mg per dose that is 2 doses (5,000 / 2,500 = 2). A 10 mg vial holds twice as many doses at the same per-dose amount. In practice, expect slightly fewer usable doses because of dead space and small losses with each draw.

How long does reconstituted TB-500 last?

Store it refrigerated at 2-8 C and use it within 28 days of reconstitution, following USP multi-dose vial guidance. Write the reconstitution date on the vial, discard it after 28 days even if solution remains, and never freeze reconstituted solution. Discard it sooner if it turns cloudy, changes colour, or contains particles.

Is TB-500 dosing the same on a U-40 syringe?

No – units differ between syringe scales, even though the volume and the mcg dose are the same. The most common error is treating U-40 units as if they were U-100 units. For example, 0.80 mL is 80 units on a U-100 syringe, but only 32 units on a U-40 syringe. Always check the scale printed on the syringe before drawing.

References and sources

  • USP multi-dose vial guidance – 28-day beyond-use limit for multi-dose vials after first use, and refrigerated storage at 2-8 degrees C for reconstituted solutions, unless the manufacturer states otherwise.
  • Standard bacteriostatic water composition (0.9% benzyl alcohol in sterile water for injection) – the diluent used for the reconstitution figures on this page.
  • Peptide reconstitution method and unit conversions – see our guide to peptide reconstitution and IU vs mg vs mcg: the difference.

Last updated: November 2026

This content is for educational and research purposes only. It is not medical advice. Always confirm doses with a clinician.

Related peptide calculators

Scroll to Top